Fife and Edinburgh based, covering the whole of Scotland
Cool and heat several rooms from a single outdoor condenser, with independent control in every space and only one unit on the outside wall.
Same working day reply · No obligation
We use your details only to respond to this enquiry. No obligation, no pushy follow-ups.
A multi-split system connects several indoor units to a single outdoor condenser. For homeowners who want more than one room treated, it is usually the neatest solution: instead of three or four condensers dotted around the garden wall, there is one, sited where it makes least visual and acoustic impact. Inside, each room keeps its own controller, so bedrooms, home offices and living spaces can be set independently.
A typical Fife family home might have units in two bedrooms, a home office and an open-plan kitchen-dining space. An Edinburgh townhouse might treat the top-floor rooms that overheat while leaving the cooler ground floor alone. In both cases the outdoor unit modulates to match whatever demand exists at that moment, so running only one bedroom overnight does not mean running a system sized for the whole house.
Multi-split wins where external wall space or aesthetics rule out multiple condensers, where the rooms are reasonably grouped so pipework can be routed sensibly, and where the whole project is being done at once. Individual splits can be a better answer where rooms are far apart, where work will be phased over several years, or where one room is business-critical and you want it independent of everything else.
Total capacity has to be calculated for the property while allowing for the fact that not every room peaks at the same time. Indoor unit capacities have to be matched sensibly to each room rather than split evenly. Refrigerant pipe sizes, branch positions, maximum lengths, height differences and oil return all have to respect manufacturer limits, or the system will underperform and shorten the life of the compressor.
You will know exactly where each indoor unit goes, how large it is, where pipework travels, how it will be concealed, and what the finished result will look like in each room.
Survey, design, installation, commissioning and planned maintenance handled by the same Fife-based engineers.
Most multi-split installations take two to three days depending on the number of rooms and the complexity of the pipe routes. We plan the sequence so the messiest work happens first, with each room finished and cleaned before we move on. Dust sheets, floor protection and a tidy site at the end of every day are part of the job rather than an extra.
Before work begins, we agree the position of the indoor units, outdoor unit and pipe routes with you, taking care to keep the installation as neat and discreet as possible. Where practical, pipework is routed through suitable areas to reduce visual impact, while wall penetrations are carefully planned to avoid unnecessary drilling. This approach helps keep disruption to a minimum while ensuring the system is installed correctly.
Our engineers also keep you informed throughout the installation, explaining what is being done and highlighting any decisions that need to be made along the way. Once the equipment is connected, the system is tested, commissioned and checked to make sure everything is operating as it should. The final stage includes cleaning the work areas and leaving your rooms ready to use.
For homeowners considering Air Conditioning Fife, careful planning and a tidy installation process can make a significant difference, particularly when several rooms need to be connected to the same outdoor unit.
Pipework routing is the aspect that shapes the whole project in Scottish housing stock. Where a property has accessible voids, cupboards, or a loft space above the rooms being treated, we can hide almost everything. Where it does not, we discuss honest options with you: neat external trunking that follows the architecture, a boxed internal route in a corner, or first-fix work as part of a wider renovation if you are already building. We would rather have that conversation before the deposit than after the first wall is drilled.
Commissioning a multi-split is a longer process than a single system. Each indoor unit is addressed and tested, the whole circuit is pressure tested and evacuated as one, refrigerant charge is adjusted for total pipe length, and every room is proved in both cooling and heating with temperatures recorded. Controls are then set up as you want them, including any app control, schedules or setpoint limits for children’s bedrooms.
Because a multi-split carries a larger refrigerant charge and serves more of the home, annual maintenance is worth taking seriously. Filters in every indoor unit, condensate drains, the outdoor coil and the refrigerant circuit all benefit from a yearly visit, and manufacturer warranties generally depend on it. We offer domestic maintenance across Fife, Edinburgh and the rest of Scotland, and contract customers get priority if anything ever does go wrong.
If you are weighing up whole-home comfort, send us a note about the rooms you want treated and we will arrange a survey, model the options and give you a clear written proposal covering both a multi-split and individual systems so you can compare properly.
Homeowners, facilities managers and food businesses in Fife, Edinburgh and beyond.
Send us the details and we will arrange a survey across Fife, Edinburgh or anywhere in Scotland.
No pressure, no jargon and no surprises once the work begins.
Call us or send an enquiry and we will ask a few practical questions about the building, the rooms you want cooled and how you plan to use the system.
We survey the property, calculate the heat load, agree indoor unit positions and pipe routes, and design a system that suits the building rather than a catalogue.
You receive a clear written proposal covering equipment, works, timescales and warranty, with nothing hidden in the small print.
Our F-Gas registered engineers carry out the work, protect your property as they go and commission the system properly before handover.
We hand over documentation, show you how to run the system efficiently and offer planned maintenance to keep warranties and performance intact.
Still unsure about something? Call us and ask — we would rather answer questions than sell you the wrong system.
Domestic multi-split condensers commonly support between two and five indoor units. The limit depends on the model, the total capacity required and the pipe lengths involved, all of which we confirm at design stage.
Yes. Every indoor unit has its own controller and setpoint. The only limitation is that all indoor units on a standard domestic multi-split must be in the same mode, so you cannot heat one room while cooling another.
It is usually less expensive than installing three or more separate systems, and it is far tidier externally. For two rooms the costs are often close, so we price both options where it is a genuine choice.
All connected rooms are affected, which is why we use quality equipment, commission carefully and recommend annual servicing. Where one room is business-critical, we sometimes advise keeping it on its own dedicated system.
We aim to conceal pipework in voids, lofts or cupboards wherever the building allows. Where a concealed route is not possible we agree a neat trunked or boxed solution with you before work begins.
Typically two to three days for a multi-room system, depending on the number of indoor units, access and pipe routes. We confirm the programme in your written proposal.
Call us for anything urgent, or send the form and we will reply the same working day.
A few details are enough for us to come back with sensible advice.
We use your details only to respond to this enquiry. No obligation, no pushy follow-ups.
