Fife and Edinburgh based, covering the whole of Scotland
Quiet, efficient wall-mounted air conditioning installed properly the first time, with heating in the colder months included as standard.
Same working day reply · No obligation
We use your details only to respond to this enquiry. No obligation, no pushy follow-ups.
A domestic split system is the most straightforward way to make a Scottish home comfortable all year. One indoor unit is fitted in the room you want treated, one outdoor condenser is sited on an external wall or at ground level, and a small pair of insulated refrigerant pipes connects them. The system cools and dehumidifies in summer, and because every unit we install is also a heat pump, it heats the same room efficiently through spring, autumn and winter.
Bedrooms that sit under a warm roof and become impossible to sleep in from June onwards. Loft conversions and garden rooms with large areas of glass. Home offices where staying productive through a heatwave matters. Extensions and open-plan kitchens that gain heat from cooking, appliances and south-facing glazing. Each of those spaces has a different heat load, which is why we survey rather than guess.
We measure the room, take account of glazing orientation and shading, consider insulation levels, allow for occupancy and equipment, and calculate the capacity actually required. Oversizing is as much of a problem as undersizing: a unit that is too large cools quickly, switches off, and leaves the room feeling clammy because it never runs long enough to remove moisture properly. Correct sizing produces steady, quiet, comfortable conditions.
Where the indoor unit will look right and distribute air well. Where the outdoor unit can sit so it is quiet at night, accessible for future servicing and considerate to neighbours. How the pipework and condensate drain will travel between the two with the least disruption to your decoration, and whether trunking, a boxed route or a chased run suits your property best. In older stone properties and Edinburgh tenements this planning stage takes longer, and it is time well spent.
We specify from established manufacturers whose UK spares and technical support are dependable, and we match the unit to the job: a slim, very quiet wall unit for a bedroom, a higher capacity model for an open-plan space, a floor-standing or low-wall unit where there is no suitable high wall, or a slim ducted unit with discreet grilles where the equipment needs to disappear entirely.
Survey, design, installation, commissioning and planned maintenance handled by the same Fife-based engineers.
A single room installation is normally completed in one day. Two engineers arrive, protect floors and furnishings, and set out the works with you before anything is drilled. The indoor unit bracket is fixed, a core is drilled through the external wall, the outdoor unit is mounted on brackets or a ground stand, and the refrigerant pipework is run, brazed and insulated. The system is then pressure tested with nitrogen, evacuated with a vacuum pump to remove moisture and air, charged, and commissioned.
The details in that sequence matter more than most homeowners realise. Brazed joints rather than compression fittings where possible, a proper deep vacuum rather than a token one, correctly supported and insulated pipework, and a condensate route with fall or a pump where gravity is not available. These are the differences between a system that runs silently for fifteen years and one that develops a slow leak, an intermittent fault or a damp patch on a ceiling.
Before we leave, we run the system in both cooling and heating, check temperatures and pressures, confirm the drain is clear, and complete the commissioning and F-Gas documentation. We then show you how to use the controller and any app, explain sensible setpoints, and demonstrate how to clean the filters yourself, which is the single most useful piece of routine care a homeowner can do.
Aftercare is part of the offer, not an afterthought. Manufacturer warranties on the equipment we install generally require annual servicing to remain valid, so we offer a straightforward domestic maintenance visit that keeps both the warranty and the efficiency intact. If anything needs attention in between, you are dealing with the same local team that installed the system rather than a call centre.
We install throughout Fife and Edinburgh, and travel across Scotland for domestic projects where a system needs to be designed properly rather than dropped in. If you would like a written proposal, send us the room details through the form and we will arrange a survey at a time that suits you.
Homeowners, facilities managers and food businesses in Fife, Edinburgh and beyond.
Trustindex verifies that the original source of the review is Google. 
Trustindex verifies that the original source of the review is Google. Send us the details and we will arrange a survey across Fife, Edinburgh or anywhere in Scotland.
No pressure, no jargon and no surprises once the work begins.
Call us or send an enquiry and we will ask a few practical questions about the building, the rooms you want cooled and how you plan to use the system.
We survey the property, calculate the heat load, agree indoor unit positions and pipe routes, and design a system that suits the building rather than a catalogue.
You receive a clear written proposal covering equipment, works, timescales and warranty, with nothing hidden in the small print.
Our F-Gas registered engineers carry out the work, protect your property as they go and commission the system properly before handover.
We hand over documentation, show you how to run the system efficiently and offer planned maintenance to keep warranties and performance intact.
Still unsure about something? Call us and ask — we would rather answer questions than sell you the wrong system.
A single wall-mounted split system is usually installed and commissioned in one day by two engineers. Longer pipe runs, difficult access or additional rooms can extend this to two days.
Most domestic installations in Scotland do not require planning permission, but listed buildings, conservation areas and flats with shared external walls can be exceptions. We will flag anything of concern at survey stage.
Modern inverter condensers are very quiet, typically comparable to a domestic fridge at a few metres. Siting matters, so we choose a position that keeps sound away from bedroom windows and boundaries.
Yes. Every system we install is a reversible heat pump, delivering around three to five units of heat for each unit of electricity used, which makes it an efficient way to heat a single room.
Less than most people expect. We core one hole through the external wall, keep pipework routes as short and discreet as possible and protect your floors and furniture throughout the visit.
Finance provided through IC Maintenance Services Limited for Thistle Climate. Ask us about current options when you receive your written proposal.
Call us for anything urgent, or send the form and we will reply the same working day.
A few details are enough for us to come back with sensible advice.
We use your details only to respond to this enquiry. No obligation, no pushy follow-ups.